C&C WarehouseLadson SC warehouseHanahan SC warehouse
Container transloading

Container Transloading near the Port of Charleston

Off the chassis, devanned on the dock, straight to outbound staging.

Container transloading near the Port of Charleston is the port-direct devan and cross-dock. The container comes off the chassis, is unloaded on the dock, and the freight moves to outbound staging — no put-away, no rack pull, no second touch. It runs from the Ladson SC warehouse and the Hanahan SC warehouse, and it pairs with drayage and container devanning in Charleston done by the same crew. Freight that comes in one side and goes out the other is cross-dock in Charleston. C&C Warehouse has been family-run since 1998.
Request a quoteCall (843) 818-2332
Handoff
Chassis to outbound staging
Turn
Same-day when windows align
Buildings
Ladson and Hanahan
Bond
Holds when both legs are bonded
Port of Charleston

Container transloading from both Charleston buildings.

The primary building is the Ladson facility, 60,000 sq ft at 137 Acres Drive, Ladson, SC 29456. The Hanahan facility, 30,000 sq ft at 1014 Northpointe Industrial Blvd, Hanahan, SC 29410, is closer to the port terminals — the shortest drayage runs in the network. Inventory moves between the buildings as needed. Inbound drayage is from Wando Welch, North Charleston Terminal, and Hugh K. Leatherman. The miles below are the per-building figures already published on the location pages and the Port of Charleston terminals guide.

Hanahan — closer to the terminals

Wando Welch
~16 miles — across I-526.
North Charleston Terminal
~7 miles — minutes away.
Hugh K. Leatherman
~6 miles — the closest terminal to this facility.

Ladson — primary building

Wando Welch
~24 miles — short-haul drayage via I-526.
North Charleston Terminal
~14 miles — quick run down I-26.
Hugh K. Leatherman
~14 miles — direct access off I-26.

Both facilities sit within 25 miles of all three SC Ports Authority ocean terminals. A longer walkthrough of the handoff is the transloading Charleston guide.

How a transload moves

From the terminal stack to outbound staging.

The container is drayed in, unloaded on the dock, and staged to leave. It is not put away in between.

  1. STEP 01

    Book the terminal pull

    Once the container is available at Wando Welch, North Charleston Terminal, or Hugh K. Leatherman, the appointment is booked and a chassis is lined up — standard, tri-axle, or heavy-haul — so the box is not left accruing per diem or demurrage.

  2. STEP 02

    Confirm the seal at the gate

    The driver takes possession off the stack and checks that the seal is intact before leaving the terminal. A seal anomaly is photographed and reported before the drive, not after it.

  3. STEP 03

    Devann on the dock

    The container comes off the chassis at a dock door in Ladson or Hanahan and is hand-unloaded. The count is checked against the bill of lading. The same crew that drayed the box can hand it straight to that unload.

  4. STEP 04

    Stage outbound, then return the empty

    Freight moves straight to outbound staging. Same-day when the inbound and outbound windows align. If the carrier pulls the next day, the freight stays on the floor, not in the rack, until the booked appointment. The empty goes back, and the chassis is split to the terminal that released the box.

How the words differ

Transload, cross-dock, devan, and a split.

Cross-dock
Freight in one side and out the other, often the same day, with little or no dwell. That work is cross-dock in Charleston. Transloading is the same handoff when the inbound is a container taken off the chassis.
Devanning
The hand unload at the warehouse, with a piece-count against the bill of lading. After the count, freight can go to a rack, to an outbound carrier, or onto pallets. Straight to outbound staging is the transload. See container devanning in Charleston.
Deconsolidation
The split. One master bill becomes several outbound shipments, each with its own house BOL, by customer, store, or region. A load can be split and then cross-docked. That page is Port of Charleston deconsolidation.
Storage
Freight for a transload is staged to move. If the outbound carrier does not pull until the following day, it waits on the floor, not in the rack. The rack is for freight that is put away.
What the move includes

A port-direct handoff, from either building.

Both buildings
Ladson at 137 Acres Drive is the primary floor. Hanahan at 1014 Northpointe Industrial Blvd is closer to the terminals. Same WMS, same crew, same phone number.
Same-crew drayage
The short haul from Wando Welch, North Charleston Terminal, or Hugh K. Leatherman can end at the same dock that unloads the box. No intermediate yard on that pattern.
Same-day when it lines up
When the inbound and outbound windows align, the freight is in and out the same day. Peak throughput across both locations is 30 containers/day. Devanning, reworking, and cross-dock are scaled by product mix.
In bond when both legs are
An in-bond inbound headed to another bonded facility, or for re-export, can cross the dock without breaking the bond. The buildings are a CBP Class 3 bonded warehouse — an importer's private bonded warehouse — and a CBP-designated General Order facility.
Sort on the way across
On a cross-dock, freight can be sorted by SKU, store, route, customer, or retailer DC, with labels, BOLs, and an outbound ASN in the form the receiver expects. A transload uses that same dock sequence with the container as the inbound.
Quote from the documents
No rate is published here. The dock plan is quoted from the routing guide, the inbound shape, and the outbound destinations. Call (843) 818-2332 or use the quote form.
FAQ

Questions about container transloading in Charleston.

What is container transloading near the Port of Charleston?

Container transloading near the Port of Charleston is the port-direct devan and cross-dock. The ocean container comes off the chassis at the warehouse dock, the freight is unloaded there, and it goes straight to outbound staging. There is no put-away, no rack pull, and no second touch. It pairs with drayage and the devan done by the same crew. The cargo touches the floor, and it does not dwell.

Where do you transload containers in Charleston, SC?

Transloading runs at both buildings. The primary floor is the Ladson facility, 60,000 sq ft at 137 Acres Drive, Ladson, SC 29456. The Hanahan facility, 30,000 sq ft at 1014 Northpointe Industrial Blvd, Hanahan, SC 29410, sits closer to the port terminals and has the shortest drayage runs in the network. Freight can move between the buildings. The WMS, the crew, and the phone number stay the same.

Which Port of Charleston terminals feed a transload?

The inbound leg is drayage from Wando Welch, North Charleston Terminal, and Hugh K. Leatherman into either building. From Hanahan: Wando Welch is about 16 miles, across I-526. North Charleston Terminal is about 7 miles, minutes away. Hugh K. Leatherman is about 6 miles, the closest terminal to this facility. From Ladson: Wando Welch is about 24 miles, short-haul drayage via I-526. North Charleston Terminal is about 14 miles, quick run down I-26. Hugh K. Leatherman is about 14 miles, direct access off I-26. Both facilities sit within 25 miles of all three SC Ports Authority ocean terminals.

How does transloading pair with drayage?

Drayage is the short haul from a SC Ports Authority terminal to the warehouse. Once the container is available, the appointment is booked and the chassis is lined up — standard, tri-axle, or heavy-haul — so the box is not left accruing per diem or demurrage. The driver takes possession and confirms the seal is intact before the gate. A seal anomaly is photographed and reported before the drive. At the dock, that same crew can hand the container straight to the unload. There is no intermediate yard in that pattern.

How is transloading different from cross-dock, devanning, and deconsolidation?

Cross-dock is the speed pattern: freight comes in one side and goes out the other, often the same day, with little or no dwell. Transloading is that pattern when the inbound is an ocean container taken off the chassis at the dock. Devanning is the hand unload itself, with a piece-count audit against the bill of lading. After a devan, freight can go to a rack, to an outbound carrier, or onto pallets. Straight to outbound staging, with no put-away, is the transload. Deconsolidation is the split: one master bill becomes several outbound shipments, each on its own house BOL. A load can be split and then cross-docked, or it can wait until each destination is ready.

Can transload freight stay in bond?

Yes, when the inbound is in bond and the outbound is also a bonded move, such as a move to another bonded facility or a re-export. That freight can cross the dock under bond without breaking the status. A Class 3 warehouse can also take an in-bond container off the terminal onto the bonded floor without breaking the bond. C&C Warehouse is a CBP Class 3 bonded warehouse — an importer's private bonded warehouse — and a CBP-designated General Order facility in Ladson and Hanahan.

How fast can a transload turn?

Same-day when the inbound and outbound windows align. If the outbound carrier does not pull until the following day, the freight is staged on the floor, not in the rack, and tendered at the booked appointment. Peak throughput across both locations is 30 containers/day. Devanning, reworking, and cross-dock are scaled by product mix.

Do you publish a transload rate?

This page does not publish a rate. A quote starts from the routing guide, the inbound shape, and the outbound destinations. If a retailer has a compliance manual, share it before the first load. Call (843) 818-2332, email information@candcwarehouse.com, or use the quote form. Hours published on the site are Monday–Friday, 8:00 a.m. to 4:30 p.m..

A container coming off a Charleston terminal?

Send the routing guide, the inbound shape, and the outbound destinations.

Start a quoteCall (843) 818-2332All services